EasyManuals Logo

FIBARO ROLLER SHUTTER 3 User Manual

FIBARO ROLLER SHUTTER 3
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
DESCRIPTION AND FEATURES
Main features of FIBARO Roller Shutter 3:
Compatible with any Z-Wave or Z-Wave+ Controller,
Supports Z-Wave network Security Modes: S0 with AES-128
encryption and S2 Authenticated with PRNG-based encryption,
To be installed with roller blind motors with electronic or
mechanical limit switches,
Advanced microprocessor control,
Active power and energy metering functionality,
Works with various types of switches – momentary, toggle and
dedicated roller blind switches,
To be installed in wall switch boxes.
FIBARO Roller Shutter 3 is a device designed to control roller blinds,
awnings, venetian blinds, gates and other single phase, AC powered
devices.
Roller Shutter 3 allows precise positioning of roller blinds or venetian
blind lamellas. The device is equipped with power and energy
monitoring. It allows to control connected devices either via the
Z-Wave network or via a switch connected directly to it.
#1: Description and features
FIBARO Roller Shutter 3 is a fully
compatible Z-Wave PLUS device.
NOTE
The device is a Secu-
rity Enabled Z-Wave
Plus product and a Se-
curity Enabled Z-Wave
Controller must be
used in order to fully
utilize the product.
i
NOTE
This device may be
used with all de-
vices certied with
the Z-Wave Plus cer-
ticate and should be
compatible with such
devices produced by
other manufacturers.
All non-battery oper-
ated devices within
the network will act as
repeaters to increase
reliability of the net-
work.
i

Other manuals for FIBARO ROLLER SHUTTER 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FIBARO ROLLER SHUTTER 3 and is the answer not in the manual?

FIBARO ROLLER SHUTTER 3 Specifications

General IconGeneral
Device TypeRoller Shutter Controller
ProtocolZ-Wave
Radio ProtocolZ-Wave
Dimensions42.5 x 38.25 x 20.3 mm
Mounting Box RequirementsØ ≥ 50mm, depth ≥ 60mm
Protection ClassIP20
Maximum Load for AC Output4.2A
Max Transmit Powerup to 6 dBm
RangeUp to 50m (open space)
Operating Temperature0°C to 40°C
Z-Wave Frequency868.4 MHz EU
CompatibilityWorks with various Z-Wave and Z-Wave Plus certified devices
Radio Frequency868.4 or 908.4 or 921.4 MHz EU frequency band