Fibocom FM101-GL User Manual

4 Radio Frequency
Copyright © Fibocom Wireless Inc. 52
Mode
Band
3GPP
Requirement
(dBm)
Tx Power
(dBm)
Note
Band 40
23±2.7
23±1
10MHz Bandwidth, 1 RB
Band 41
2
)
(HPUE)
26±2.7
26±1
10MHz Bandwidth, 1 RB
Band 41
2
）
(Non-HPUE
mode)
23±2.7
23±1
10MHz Bandwidth, 1 RB
Band 42
23+3/-4
23±1
10MHz Bandwidth, 1 RB
Band 43
23+3/-4
23±1
10MHz Bandwidth, 1 RB
Band 48
23+2/-3
21±1
10MHz Bandwidth, 1 RB
1）B39 TX power is 20±2.7dBm in japan
2）Module default max capability support HPUE. The real working mode is
decided by NW. If NW support HPUE, the module can work in HPUE. If NW
can only support PC3, the module will work in non-HPUE mode.
4.4 Receiver Sensitivity
4.4.1 Dual Antennas Receiver Sensitivity
All bands support dual antennas, the receiver sensitivity for each band of FM101 module
is shown in below table:
Mode
Band
3GPP Requirement
(dBm)
Rx Sensitivity
Typical(dBm)
Note
WCDMA
Band 1
-106.7
TBD
BER < 0.1%

Fibocom FM101-GL Specifications

General

Brand	Fibocom
Model	FM101-GL
Category	Wireless modules
Language	English