EasyManuals Logo

Fibocom L850-GL Series User Manual

Fibocom L850-GL Series
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM L850-GL Series Hardware Guide Page 56 of 59
Figure 5-4 M.2 dimension of structure
5.5 Storage
5.5.1 Storage Life
Storage Conditions (recommended): Temperature is 23 ± 5°C, relative humidity is less than RH 60%.
Storage period: Under the recommended storage conditions, the storage life is 12 months.
5.6 Packing
The L850 module uses the tray sealed packing, combined with the outer packing method using the hard
cartoon box, so that the storage, transportation and the usage of modules can be protected to the greatest
extent.
Note
The module is a precision electronic product, and may suffer permanent damage if no correct
electrostatic protection measures are taken.
5.6.1 Tray Package
L850-GL-01 serial module uses tray package, 20 pcs are packed in each tray, with 5 trays including one
empty tray on top in each box and 5 boxes in each case. Tray packaging process is shown in Figure 5-5:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fibocom L850-GL Series and is the answer not in the manual?

Fibocom L850-GL Series Specifications

General IconGeneral
CategoryGSM/GPRS Modules
ModelL850-GL
Form FactorM.2
Operating Temperature-10°C to +55°C
Storage Temperature-40°C to +85°C
GSM Bands850/900/1800/1900MHz
GNSSGPS, GLONASS, BeiDou, Galileo
InterfaceUSB 2.0, UART, PCM, I2C, GPIO
Operating Voltage3.135V to 4.4V
LTE FDDB1, B2, B3, B4, B5, B7, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28, B29, B30, B66
LTE TDDB38/B39/B40/B41
WCDMAB1, B2, B4, B5, B8
AT Command Set3GPP TS 27.007
CertificationsCE, FCC, GCF, PTCRB