Name: Fibocom L850-GL Series
Brand: Fibocom
Rating: 4 (1 reviews)

To Next Page

To Previous Page

FIBOCOM L850-GL Series Hardware Guide Page 9 of 59

1 Foreword

1.1 Introduction

The document describes the electrical characteristics, RF performance, dimensions and application

environment, etc. of L850-GL (hereinafter referred to as L850). With the assistance of the document and

other instructions, the developers can quickly understand the hardware functions of L850 modules and

develop products.

1.2 Reference Standard

The design of the product complies with the following standards:

 3GPP TS 34.121-1 V8.11.0: User Equipment (UE) conformance specification; Radio transmission

and reception (FDD); Part 1: Conformance specification

 3GPP TS 34.122 V11.13.0: Technical Specification Group Radio Access Network; Radio

transmission and reception (TDD)

 3GPP TS 36.521-1 V11.4.0: User Equipment (UE) conformance specification; Radio transmission

and reception; Part 1: Conformance testing

 3GPP TS 21.111 V10.0.0: USIM and IC card requirements

 3GPP TS 51.011 V4.15.0: Specification of the Subscriber Identity Module -Mobile Equipment (SIM-

ME) interface

 3GPP TS 31.102 V10.11.0: Characteristics of the Universal Subscriber Identity Module (USIM)

application

 3GPP TS 31.11 V10.16.0: Universal Subscriber Identity Module (USIM) Application Toolkit(USAT)

 3GPP TS 36.124 V10.3.0: Electro Magnetic Compatibility (EMC) requirements for mobile terminals

and ancillary equipment

 3GPP TS 27.007 V10.0.8: AT command set for User Equipment (UE)

 3GPP TS 27.005 V10.0.1: Use of Data Terminal Equipment - Data Circuit terminating Equipment

(DTE - DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)

 PCI Express M.2 Specification Rev1.2

1.3 Related Documents

 FIBOCOM Design Guide_RF Antenna

Questions and Answers:

Need help?

Do you have a question about the Fibocom L850-GL Series and is the answer not in the manual?

Fibocom L850-GL Series Specifications

General