FieldBee toolbox manual v.1.0
fig.6.7
FieldBee adjustment
FieldBee base station adjustment
FieldBee base station provide 0-4 cm accuracy for receiver. Such accuracy is achieved by streaming correction to
receiver.
Base station needs satellites reception ( to be located at wide open area and have horizon line without obstacles.
Common parameters for Base station:
Base station modes
Base station can provide absolute or relative accuracy for receiver. For these parameters there are survey and static
modes.
Base survey mode
With survey mode you will have relative 0-4 cm accuracy for your field works before restart base station. After base
station restart position will be determined with few cm shift but you will still have high accuracy.
Factory settings for base station is Survey mode. It is more than enough to work with 0-4 cm accuracy.
Base Static mode
Static mode provides absolute accuracy with guiding lines repeating in days, weeks, months and even years.
To Next Page
Loading...