Need help?Do you have a question about the FieldBee RTK and is the answer not in the manual?
General| Type | RTK GNSS Receiver |
|---|---|
| GNSS signals | GPS, GLONASS, Galileo, BeiDou |
| Horizontal Accuracy | 1 cm + 1 ppm |
| Vertical Accuracy | 2 cm + 1 ppm |
| Update Rate | Up to 10 Hz |
| Ingress Protection | IP67 |
| Accuracy | Centimeter-level |
| Communication | Bluetooth |
| Operating Temperature | -20°C to 60°C |
| Voltage | 5 V DC |
Welcome to the FieldBee RTK GPS system User Guide.
Contact support for issues and provide feedback for improvements.
Overview of creating and managing FieldBee devices.
Definitions of menu items and control indicators.
Using the receiver without correction or with NTRIP.
Connecting the receiver via Wi-Fi and mobile hotspot.
Configuring the NTRIP connection for correction data.
Overview of the FieldBee RTK GPS system.
Connecting the base station and receiver for RTK operation.
Setting up communication via radio channel and internet.
Connecting the receiver to the base station.
Adjusting base station settings and operating modes.
Adjusting receiver settings, RTK modes, and correction modes.
Monitoring receiver statuses, GNSS, LoRa, and Wi-Fi.
Various advanced settings and starting navigation.
Troubleshooting visibility, Bluetooth, and Wi-Fi connection problems.
Resolving NTRIP, RTK correction, and base station issues.
Locating battery power level and charger status.
To Next Page