FieldBee RTK - Base Station Pairing

FieldBee toolbox manual v.1.0
3) choose Base station; (fig.1.1)
4) tap Base station serial number to continue setup; (fig.5.1)
5) tap Wi-Fi connection; (fig.5.2)
6) tap on available Wi-Fi network; (fig.5.3)
7) input password for this network (fig.5.4)
8) tap Connect button; (fig.5.5)
9) wait until Base station will be connected to Wi-Fi network. (fig.5.6)
Now Base station is connected to the Internet and is streaming correction to the server. (fig.5.7)
fig.5.1 fig.5.2 fig.5.3
fig.5.4 fig.5.5 fig.5.6
15