FieldBee toolbox manual v.1.0
Introduction 4
Technical assistance 4
Your comments 4
FieldBee Toolbox Operation 4
Installation 4
Menu Controls and Indicators 4
FieldBee GNSS receiver 6
Standalone sensor without any correction services 6
Standalone sensor with correction from local NTRIP provider 6
FieldBee RTK GPS system 14
FieldBee RTK base station+FieldBee GNSS receiver 14
FieldBee adjustment 19
FieldBee base station adjustment 19
Base station modes 19
Base survey mode 19
Base Static mode 20
Status/Summary 21
Radio channel and region 21
Elevation Mask 22
Constellation Mask 22
RTK Mode parameters 22
Wi-Fi settings 22
Firmware update 23
Profiles 23
Reset 23
RTCM settings 23
Binary Config 23
FieldBee GNSS receiver adjustment 24
Switch RTK mode 24
Set correction mode 24
Status/Summary 27
Radio Channel and region 27
Elevation Mask 27
Constellation Mask 28
RTK Mode Parameters 28
Wi-Fi settings 28
Profiles 28
Reset 28
Fix Status 29
Start Navigation with FieldBee 29
To Next Page
Loading...