FieldBee toolbox manual v.1.0
Introduction
Welcome to the FieldBee RTK GPS system User Guide. This manual describes how to install, set up, and use the
FieldBee GNSS receiver and FieldBee RTK base station with android toolbox application .
Technical assistance
If you have a problem and cannot find the information you need in the product documentation, contact our support team,
writing an email to support@fieldbe.com
Your comments
Your feedback about the supporting documentation helps us to improve it with each revision. E-mail your comments to
info@fieldbee.com
FieldBee Toolbox Operation
The FieldBee Toolbox allows for creating and managing FieldBee GNSS devices, connect FieldBee GNSS to FieldBee
Base station over radio or internet, setup internet connection. If changes need to be made for FieldBee , the operator will
need to manage those options in the FieldBee Toolbox application.
Installation
Download FieldBee toolbox from Play Store, following this link:
https://play.google.com/store/apps/details?id=mobi.efarmer.device.toolkit
To Next Page
Loading...