3.10.3 Idle standby
If there is no playing (playback pause, playback stop, etc.) and no operation when it
reaches to the set times, the player will automatically enter the deep standby state which only
consumes a little power, helping to save battery well and increasing the using time. Moreover,
in this state, shortly pressing the power/pause button (or insert a USB cable) could
immediately wake up the M3 Pro which will be back to the previous display.
The time to enter idle standby mode could be set in the Settings menu. When the time is
up, the system would automatically execute the operation. On the contrary, if it is turned off,
this function would be disabled.
(Notes:
①
In the state of recording or computer connection, the idle standby is invalid;
②
In the case of USB charging, the M3 Pro will be shut down when time is up.)
3.10.4 Sleep
Whether the M3 Pro is working or not, it will enter into sleep standby mode if it is set to
ON and the time is up to the set value.
The time to enter sleep standby mode could be set in the Settings menu. When the time
is up, the system would automatically execute the operation. On the contrary, if it is turned
off, this function would be disabled.
(Notes:
①
In the state of recording or computer connection, the sleep standby is invalid;
②
In the case of USB charging, the M3 Pro will be shut down when time is up;
③
There will be an indicator icon in the status bar with sleep standby function on;
④
Both the idle and sleep standby are deep standby but they vary in the condition of effect
taking. The sleep standby once set only works for one time. If the M3 Pro restarts or it has
ever been into standby modes, the sleep standby mode will be automatically switched to off.)
3.10.5 USB mode
To Next Page
Loading...
