Detailed operation instructions
Walter Finkbeiner GmbH
Alte Poststrasse 9/11
72250 Freudenstadt / Germany
www.finkbeiner.eu
26 / 56
PB-BA-EHB702-102GB
22.02.2011
• Lift the load so that it cannot slip
• Lift the load so that the load centre is more or less at the centre of
the fork tines.
6.4.1 Wheel fork
• The width of the wheel fork is manually adjustable and can be adapted to the respective wheel size
without the use of additional reducers.
• To adjust, lift the front of the individual fork tine and adjust on the support plate, until the rear stud
engages in the support plate.
DANGER
Hazard of vehicle to fall by wrong support.
• Adjust wheel forks centrally, not one-sided displaced.
Adjust wheel forks according to the respective wheel size.
Position the columns at the vehicle.
Join columns to one another using the connecting cable around the vehicle.
Lock the plugs in the sockets.
To Next Page
Loading...