EasyManua.ls Logo

Finkbeiner EHB702 - Commissioning Procedures; Column Handling: Loading and Unloading

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Commissioning
Walter Finkbeiner GmbH
Alte Poststrasse 9/11
72250 Freudenstadt / Germany
www.finkbeiner.eu
19 / 56
PB-BA-EHB702-102GB
22.02.2011
5 Commissioning
ENVIRONMENT INFORMATION
Environmental hazard through hydraulic oil leakages.
Do not tilt the lift, oil can leak out.
Remove packing material according to regulations.
5.1 Loading with fork lift truck
WARNING
Damaged packing wood or material can result in crashing of the lift.
Before loading check if package unit is free of damage.
Column package to be lifted only at the points marked by arrows; the inside distance of the fork
tines should be minimum 500 mm.
5.2 Loading with crane
Columns may be loaded individually only.
Lift the column on the front top steel plate by chain.
When using a carrying strap avoid damage of strap by sharp edges.
5.3 Unloading from container
The columns are shipped in vertical position and are connected by wooden or steel beams.
Remove packing material before unloading.
Move columns individually out of the container
.

Table of Contents