FireClass FC506 - Modify; Accessing the MODIFY Menu

51
Cursor keys
No functions are related to the Up, Down, Right, or Left
keys.
ESC and ENTER keys
Table 56: ESC and ENTER key function in NEW
repeater address
Key
Function
ESC
Cancel the operation or return to
the previous screen
ENTER
Confirm the address
Note : If the address of a repeater is changed by mistake,
the system will show the message shown in Figure 38.
The address of the repeater can be changed using the
ESC key.
Figure 38: Serial link is down
Modify
Accessing the MODIFY menu
To access the MODIFY menu from the MAIN screen,
enter the INSTALLER 1 (default is 00000) or
INSTALLER 2 (default is 99999) password. Each
entered digit will be masked with an asterisk symbol.
The INSTALLER 1 and INSTALLER 2 users can access
all the options described in the User Manual.
Refer to the FC503 & FC506 Addressable Fire
Control Panels User Manual for User Access details
and further information.
Both INSTALLER 1 and INSTALLER 2 users can access
option 9 Sounders.
Only the INSTALLER 1 can access option 7 Password.