FireClass FC506 - Key - Map Device; Key - USB

47
working
 ko! The net. device is sensed as not connected
 FAU The net. device is faulty
 DIS The net. device is disabled
 -- The net. device is not configured in the network
 OLD The net. device has an obsolete FW version.
For an explanation of the features and programming
addresses, refer to the FC500MI module document.
In this phase the keypad and keys have the following
functions:
Alphanumeric keypad
No function is related to the alphanumeric keypad.
Cursor keys
Table 47: Cursor key functions in network
Key
Function
Up
Use to enable the selected
module
Down
Use to disable the selected
module
Right
Use to select the module
Left
Use to select the module
ESC and ENTER keys
Table 48: ESC and ENTER key function in network
Key
Function
ESC
Use to abort the programming
procedure
ENTER
Use to confirm the programming
procedure and leave the screen
Figure 30: Display to enable the FC500MFI module
1
Symbol shows the selected module to
enable
6 Key – Map Device
The Map Device option activates the On Demand Map
Device feature to modify the devices addressing scheme
in a working system. See Figure 24, 0.
Use the On Demand Map Device option in a system where
the addressing scheme is well known, because all devices
are singularly addressed using the service tool or the
device mapping feature embedded in the loop enroll
process (1 key).
This feature is not intended to acquire new devices on the
loops. Use the Enroll feature to acquire new devices on
the loops.
In contrast to the device mapping feature embedded in the
loop enroll process, the On Demand version will not
automatically modify devices labels and assigned zone.
Note: All the devices, including the unique type devices will
be added to the activated list. The only output type devices
are treated as described in the standard device mapping
procedure. They will be singularly activated when
selected in the list.
In this phase the keypad and keys have the following
functions:
Alphanumeric keypad
Use the alphanumeric keypad to enter the new address
value from 0-9.
Cursor keys
Table 49: Cursor key functions in map device
Key
Function
Up
Long press: use to start the
automatic scroll to the previous
event in the list
Short press: use to scroll to the
previous event in the list.
Down
Long press: use to start the
automatic scroll to the next event
in the list
Short press: use to scroll to the
next event in the list.
Right
Use to program the selected
device
Left
Use to continue the mapping
procedure
Note: To stop the automatic scroll, short press the Up or
Down key.
ESC and ENTER keys
Table 50: ESC and ENTER key function in map device
Key
Function
ESC
Use to end the mapping
procedure and exit
ENTER
Use to confirm the entered
address value
7 Key – USB
The USB option in the PROGRAMMING menu activates
the USB programming screen. Use the 7 key to select the
USB programming screen. See Figure 24, 0.
The USB programming screen includes the following
options:
0) Extra
1) Load Audio
2) Save Audio
3) Load programming
4) Save programming
5) FW Upgrade
6) Save LOG