FireClass FC506 - Specifications; Technical Features; Description of the Terminals

68
Specifications
These specifications are aimed at suitably qualified
technicians experienced in the installation and
commissioning of fire detection and alarm systems, who
have also received FIRECLASS training.
Technical features
Table 62: FC503 and FC506 technical features
Control panel
FC503
FC506
Main voltage
230 V ~
230 V ~
60/50 Hz -15/+10%
Aux. outputs nominal
voltage
27.6V
Aux. outputs min. and max.
voltage
19.0 ÷ 27.6V
Minimum output voltage
19.0 VDC ± 5 %
Maximum current drawn
1.6 A (230V)
Ripple
1 %
Maximum internal resistance
of the battery and associated
circuitry
1 ohm
Temperature range
-5°C to +40°C
Storage temperature
-20°C to +70°C
Operating humidity
Up to 95% non-
condensing
Dimensions (W x H x D)
429.62 mm x 493.17
mm x 126.97 mm
Weight (Without batteries)
8 kg
Table 63: FC500 technical features
Repeater
FC500
Operating voltage
27.6 VDC
Maximum current
130 mA
Temperature range
-5 to +40°
Storage temperature
-20°C to +70°C
Operating humidity
Up to 95% non-
condensing
Dimensions
(W x H x D)
345.44 mm x 234.61
mm x 55.72 mm
Weight
2.7 kg
Description of the terminals
Table 64 describes the terminals of the main board and
switching power.
The first status is the standby (normal) status, followed
by the alarm status. The voltage present during the
different operating conditions is indicated for each
terminal, as well as the maximum current in amps that
can circulate.