Description of Parts
This section describes the components of the J424 and
J408 Control panels, and J400-REP Repeater.
Unless otherwise stated, the numbers in boldface in this
Manual refer to the Tables ands Diagrams in this sec
-
tion.
The parts identification numbers in the diagrams go cloc
-
kwise. The white numbers refer to parts which are com
-
mon to several of the system devices, therefore, are
described the first time they are encountered only.
P. Description
1 Surface Cable conduit entry
2 Zone label slots
3 Display
4 Door screws
5 Keyswitch (Access Level 2)
6 Display module (accessory item)
7 Expander Control board (LEDs and keys) of
Expander no. 2 (accessory item for J424)
8 Flat cable (accessory item for J424): for the
Expander Control board connection
9 Main Control board (LEDs and keys) of zones
1 through 8
10 Expander Control board (LEDs and keys) of
zones 9 through 16 (accessory item for J424)
11 Flat cable: for the Main Control Board connec
-
tion (zones 1 through 8)
12 Anchor screw locations
13 Main board (2, 4 or 8 zones)
14 Chased cable conduit entry
15 Flat cable (accessory item for J424): for the
Expander Control board connection
14 Conventional Fire Panels J424/J408
To Next Page
Loading...
