1. Safety instructions
Need to consign the control panel for maintenance and revision
The machine controlled by CCB2.0 panel must not be manipulated when it is in operation.
Facing any problem that is detected in the machine during its operation, disconnect it
and set the main switch of the CCB2.0 panel using a padlock.
Installation of a residual current device in the power supply line.
The installer must install a specific residual current device in the machine's electrical
power circuit.
FISAIR disclaims any liability if not all the installation and operating instructions it has
provided are complied with; if the products have been modified or altered without the written
consent of FISAIR; or if the products have been subjected to improper use, mishandling,
alteration, improper maintenance or show signs of negligent use or being involved in an
accident. These situations could include an incorrect power connection, impacts with other
objects, removal or disarming of security fittings/measures, etc.
To Next Page
Loading...