11
CleanSmart
™
safety features
Lid lock
The lid of your CleanSmart™ washer is locked during the wash cycle, ensuring safety for you and
your family while it is operating.
The ‘Lid locked’ light (above the START / PAUSE button) is illuminated when the lid lock is
activated, letting you know at a glance if you can open the lid or not.
To unlock the lid at any time during the cycle touch START / PAUSE.
The lid will be locked from the start of the wash to the end, unless START / PAUSE is pressed.
If the lid is left open, your CleanSmart™ washer will be unable to
lock the lid, and the cycle will be halted. The machine will beep
to alert you and display a warning message on the screen. If this
occurs, ensure that the lid is closed and touch START / PAUSE.
Important!
Do not put anything down the lid lock slot in the top deck of your
machine.
Do not try to disable the lid lock.
Auto drain
Unsupervised clothes washers filled with water can present a drowning hazard to small children.
In order to minimise any risk of this type of accident, your CleanSmart™ has been
pre-programmed to know when this potential hazard is created and drain the wash water to a
safe level.
If you pause your CleanSmart™ at any time during the wash cycle when there is water in the
bowl, the machine will activate the AUTO DRAIN function after 3 minutes. This will drain the
water in the wash bowl to an acceptable level, minimising any potential hazard.
A message (“Adr”) will be displayed on the digital display while AUTO DRAIN is in operation. The
cycle can be restarted at any time by touching START / PAUSE.
Fig.10 Lid lock
To Next Page
Loading...
Need help?
General
