25
Customising wash cycles
To customise a cycle
You can program your CleanSmart™ washer to remember the wash options you prefer for each
wash cycle. For instance, you may want to set the TOWELS cycle to a WARM / HOT wash or set the
HEAVY cycle to include a SOAK.
1
Press POWER.
2
Turn the dial to select the wash cycle you wish to customise.
3
Touch and hold the button of the option you want to customise, eg WASH TEMP for 3 seconds.
You will hear 2 quick beeps and the wash cycle icon will flash. The screen will display “SET”.
4
Select your preferred setting for this option, and any other options you wish to customise for
this cycle.
5
Touch the START / PAUSE button to store your customised cycle. A long beep will sound to
confirm that your changes have been saved.
To change your customised wash cycle simply repeat these steps.
Fig.16 Customising a wash cycle, eg customising the wash temperature for the REGULAR cycle
To Next Page
Loading...
