30
Changing pre-set options
Factory reset
You can reset your washer to the default settings it left the factory with.
To reset your washer to its factory settings:
1
Enter Option Adjustment mode (refer to page 26).
2
Select the EASY IRON cycle.
3
The display will show “rSt”. Touch START / PAUSE for 3 seconds to reset your washer to its factory
settings.
Note: this action will reset the washer to the default settings, exit Option Adjustment mode and
then restart the washer in normal operating mode.
Touch POWER to exit if you do not wish to reset your washer.
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Fig.24 Changing the washer settings back to the factory default
Remember, to save changes and exit from the Option Adjustment mode at any time (ie to return
to normal operating mode), touch the POWER button.
To Next Page
Loading...
Need help?
General
