The following information and attachments constitute Change 1 to the DPRSOO Integral
Controller User Manual, UM6.1 :DPR900:9102. Vertical change bars are used to highlight
the material affected by this change.
How to Insert This Change
1. Remove title page and insert Change 1 title page.
2. Insert Page A/B, List of Effective Pages at the end of the table of contents
3. Remove page 1-3 thru l-6 and insert changed pages l-3 thru 1-6
4. Remove page 2-3 thru 2-6 and insert changed pages 2-3 thru 26.
5. Remove page 2-g/2-10 and insert changed page 2-912-10. Reason for change was to
clarify connection of analog output signals.
6. Remove page 3-13/3-14 and insert changed page 3-13/3-14. Reason for change was
to remove unnecessary text.
7. Remove page 5-i/5-2 and insert changed page 5-115-2. Reason for change was to
add information in table.
8. Remove page 5-7 thru 5-l 0 and insert changed page 5-7 thru 5-l 0. Reason for
change was to add clarifying text and change table.
9. Remove page 5-13/5-14 and insert changed page 5-13/S14. Reason for change was
to correct options and change A05 to DO5 in figure.
10. Remove page 5-25/5-26 and insert changed page 5-25/5-26. Reason for change was
to add information in table.
11, Remove page 5-31/5-32 and insert changed page 5-31/5-32. Reason for change was
to add information in table.
12. Remove page 5-37/540 and insert changed page 5-37/540. Reason for change was
to add information to table and expand text.
13. Remove page 5-57 thru 5-64 and insert changed page 5-57 thru 5-64. Reason for
change was to add table on 5-58 and correct table information as highlighted.
14. Remove Appendix B and insert changed Appendix B. Reason for change was to add
FCODE’s to index.
15. Remove Appendix C and insert changed Appendix C. Reason for change was to correct
part number and add new part.
16. Remove end page and insert new end page. Reason for change was to correct
informational block.
17. Place this instruction page behind Change 1 Page A, as a record of Change 1 insertion.
To Next Page
Loading...
