EasyManua.ls Logo

Fisher FIELDVUE DVC6200f User Manual

Fisher FIELDVUE DVC6200f
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.Fisher.com
Fisher
r
FIELDVUE
DVC6200f Digital Valve
Controller for F
OUNDATION™ fieldbus
Instruction Manual
D103412X012
DVC6200f Digital Valve Controller
July 2013
This manual applies to:
Device Type 4602
Device Revision 2
Hardware Revision 8
Firmware Revision 2.0
DD Revision 2 and 3
Instrument Level FD, PD, AD

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Fisher FIELDVUE DVC6200f and is the answer not in the manual?

Fisher FIELDVUE DVC6200f Specifications

General IconGeneral
ManufacturerFisher
CategoryController
ModelFIELDVUE DVC6200f
TypeDigital Valve Controller
Operating Temperature-40 to 85°C (-40 to 185°F)
Enclosure RatingNEMA 4X, IP66
Hazardous Area CertificationsATEX, IECEx, FM, CSA
Communication ProtocolFOUNDATION Fieldbus
Input Signal4-20 mA
Output Signal4-20 mA, digital signal
Supply Pressure1.4 to 6.0 bar (20 to 90 psig)
MountingDirect mounting on valve

Summary

Section 1 Introduction and Specifications

Specifications

Details the technical specifications and capabilities of the DVC6200f, including electrical and environmental data.

Section 2 Installation

Installation Procedures

Covers general installation procedures, including safety warnings and preparation steps.

Section 3 Basic Setup

Basic Setup Procedures

Outlines the essential procedures for initial setup and calibration of the instrument.

Device Setup

Guides through automatically setting up the instrument using actuator information and factory defaults.

Section 4 Detailed Setup

PlantWeb Alerts Setup

Guides on implementing PlantWeb alerts, including enabling and reporting configurations.

Section 5 Calibration

Calibration Procedures

Outlines the procedures for auto, manual, relay, and sensor calibration.

Auto Calibration

Explains the automatic procedure for calibrating the valve and actuator travel.

Manual Calibration

Details the manual procedure for calibrating valve travel points.

Section 7 Maintenance and Troubleshooting

Replacing the Magnetic Feedback Assembly

Details the steps for removing and replacing the magnetic feedback assembly.

Instrument Troubleshooting

Provides steps for initial troubleshooting of common instrument issues.

Table 7-2. Instrument Troubleshooting

Lists common symptoms, possible causes, and corrective actions for troubleshooting.

Section 8 Parts

Parts Ordering

Guides on how to order replacement parts and kits, including part numbers.

Appendix E Device Description Installation

Installing DD on a DeltaV ProfessionalPLUS Workstation

Provides general information on installing Device Descriptions (DDs) on a DeltaV system.

Appendix F Operating with a DeltaV System

Getting Started with DeltaV Host Systems

Lists initial steps and requirements for operating the DVC6200f with a DeltaV host system.

Using AMS Device Manager

Guides on accessing the digital valve controller configuration via AMS Device Manager.

Bringing the Device On-Line

Lists conditions and steps for completely configuring the digital valve controller in a fieldbus loop.

Setting up PlantWeb Alerts

Provides steps and considerations for implementing PlantWeb alerts within the DeltaV system.

Related product manuals