Instruction Manual
D103412X012
Maintenance and Troubleshooting
July 2013
248
Technical Support Checklist
Have the following information available prior to contacting your Emerson Process Management sales office for
support.
Reference
1. Instrument serial number as read from nameplate _________________________________________
2. What is the firmware version of the DVC6200f? _________________
3. What is the hardware version of the DVC6200f? ________________
4. What is the Diagnostic Tier of the DVC6200f? FD___ AD___ PD___
5. What is the Control Tier of the DVC6200f? SC___ FL___ FC___
6. What is the address of the DVC6200f? ________________________
Mode and Status
7. What are the DVC6200f Block Modes?
Actual Modes: Resource Block _____ Transducer Block_____ Analog Output Block _____
Target Modes: Resource Block _____ Transducer Block_____ Analog Output Block _____
Permitted Modes: Resource Block _____ Transducer Block_____ Analog Output Block _____
8. What is the status of the individual function blocks?
Operational
9. Does the digital valve controller respond to the control signal? Yes _________ No _________
If No, describe
10. Is it on Travel or Pressure control?
11. What are the following parameter readings?
Setpoint _________ Drive Signal _________%
Supply Pressure _________ Pressure A _________ Pressure B _________
Travel Target _________% Travel _________% Pressure B _________
12. What is the safe position of the valve? Fail Closed ____ Fail Open ____
Interface and Diagnostic Tools
13. What interface and diagnostic tools are available?___________________________________
14. Provide any available supporting documentation, such as Status Monitor, Detailed Setup, any alert readings.
Mounting
Reference
1. Actuator application: sliding-stem? _________ Rotary? _________
2. Which digital valve controller do you have? DVC6200f _________ DVC6205f/DVC6215 _________
3. What Make, Brand, Style, Size, etc. actuator is the DVC6200f mounted on? _________________________
Operational
4. What is the full travel of the valve?__________________________________
5. What is the Mounting Kit part number? ______________________________
Other
6. If mounting kits are made by LBP/Customer, please provide pictures of installation.
To Next Page
Loading...
Need help?
General
