INSTRUCTION MANUAL FIT REMOTE DISPLAY PINION
Error code Error message displayed Action / Restriction
1C-xx Bluetooth module error 1. Restart the system.
2. Restart FIT E-Bike Control (app), update if
necessary.
3. If the problem persists, please contact your
specialist dealer.
1D-xx EMS mode active 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1E-xx OEM mode active 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1F-xx TEST mode active 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
20-xx Reserve mode active (info text) 1. Charge the battery.
2. If the problem persists, please contact your
specialist dealer.
21-xx Lock error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
22-xx Full charge cycle active Information: Battery is charged for calibration
despite Long Life mode 100%.
23-09 Tire pressure sensor error
Battery weak front
Sensor needs to be replaced soon, please contact
your specialist dealer.
23-0A Tire pressure sensor error
Battery weak rear
Sensor needs to be replaced soon, please contact
your specialist dealer.
23-0B Tire pressure sensor error
Battery weak front right
Sensor needs to be replaced soon, please contact
your specialist dealer.
23-0C Tire pressure sensor error
Battery weak rear right
Sensor needs to be replaced soon, please contact
your specialist dealer.
23-xx Tire pressure sensor error Sensor may need to be replaced, please contact
your specialist dealer.
24-01 Charger multi-battery error 1. Charge each battery individually.
2. Have the charger software update done at your
specialist dealer.
25-xx 1-Wire communication error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
26-xx Battery lock (ABUS) error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023 42
To Next Page
Loading...