FiT REMOTE DISPLAY - Page 43

INSTRUCTION MANUAL FIT REMOTE DISPLAY PINION
29-xx up to 47-xx
Error code Error message displayed Action / Restriction
29-xx Display communication error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
2A-xx Display software error 1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Replace the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
2B-xx Display authentication error 1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Replace the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
2C-xx Display internal error 1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
2D-xx Display identification error 1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Replace the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
2E-01 Display overheated
Screen brightness reduced
1. Cool display by riding.
2. Protect the display from direct sunlight.
48-xx 66-xx (Pinion)
Error code Error message displayed Action / Restriction
48-xx Motor communication error 1. Check plug contacts on the battery and bicycle
and clean if necessary.
2. Restart the system.
3. If the problem persists, please contact your
specialist dealer.
49-07 Motor error
E-bike battery not ready
1. Switch the system off.
2. Remove the battery.
3. Check plug contacts on the battery and e-bike
and clean if necessary.
4. Insert the battery.
5. Restart the system.
6. If the problem persists, please contact your
specialist dealer.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023 43