FLASHFORGE 3D PRINTER Dreamer NX - Installing Filament

Dreamer NX User Guide | www.flashforge.com
20
tighten the screws .
4.2 Installing Filament
(4-4) Lock the filament in place with the filament spool holder and turn the
filament spool counter-clockwise.
4-5
(4-5) Insert the filament through the filament guide tube. Attach the guide tube
into the two filament guide tube buckles.
4-6
(4-6) Stick the build tape to the build plate after installing filament, as picture
shows.
4-4