Dreamer NX User Guide | www.flashforge.com
Chapter 5: Build Plate Leveling
A correctly leveled build plate is almost a guarantee for a high-quality 3D
object. When there are some troubles in printing process, firstly you
should check whether the build plate is leveled or not. NOTE: Make the
distance between the build plate and nozzle to be the thickness of a piece of
paper is often helpful. However, for printing high-precision objects (150 micron
and lower), please use a feeler gauge to level the build plate as it requires a
lesser gap between the nozzle and the build plate.
The Dreamer NX utilizes a three-point leveling system for its build plate. Under
the build plate, there is one spring-loaded nut in the front and two in the back.
Tightening the nut will create a bigger gap between the build plate and the
nozzle while loosening it will create lesser gap.
5-1
1. （5-1）From the main menu, tap [Tool]-[Level]. The extruder and the build
plate will begin to move to the starting position.
5-2
To Next Page
Loading...
