Dreamer NX User Guide | www.flashforge.com
Note: Each device must be tested before leaving factory. If there are some
residues in extruder or some tiny scratches on the build tape, it is normal and
won’t affect the printing quality.
On the completion of this User Guide, thanks all FlashForge engineers and the
FlashForge 3D printer users for their unremitting efforts and sincere
The FlashForge Dreamer NXUser Guide is designed for the Dreamer NXusers
to start their printing journey with FlashForge Dreamer. Even if you are familiar
with earlier FlashForge machines or 3D printing technology, we still
recommend that you read through this guide, as there is lots of important
information about the Dreamer NXfor you to get a better 3D experience.
For a better and more successful printing experience, you
can refer to the following materials:
Users will find the Quick Start Guide together with the printer accessories. The
Quick Start Guide will help you start your print journey as soon as possible.
(2) Official FlashForge Website: http://www.flashforge.com
The official FlashForge website contains the up-to-date information concerning
FlashForge software, firmware, device maintenance and so on. Users are also
able to get the contact information from there.
To Next Page
Loading...
