Dreamer NX User Guide | www.flashforge.com
of the front side space should be at least 35cm.
Do not abuse the filament. Please make sure you use the FlashForge filament
or the filament from the brands recommened by FlashForge.
All polymers will be degraded with time. Do not unpack until filament is needed.
Filament should be stored in clean and dry conditions.
Legal Notice
All the information in this document is subject to any amendment or change
without the official authorization from FlashForge.
FLASHFORGE MAKES NO WARRANTY OF ANY KIND WITH REGARD TO
THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRATIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
FlashForge shall not be liable for errors contained herein for incidental
consequential damages in connection with furnishing, performance or use of
This document contains proprietary information protected by copyright.
Copyright © 2017 FlashForge Corp. All Rights Reserved
To Next Page
Loading...
