Flashforge DREAMER Quick Start Guide

This guide is only applicable to FLASHFORGE Dreamer 3D printer
The User Guide is in the SD card.
USERGUIDE
2. Hot! Avoid touching the heating nozzle in operation.
3. Moving parts in printer may cause injury. Do not wear gloves
or other sources of entanglement in operation.
WARNING
1. Do not remove the wrapping around the nozzle.
DREAMER
Quick Start Guide
SZ01-EN-A02

Flashforge DREAMER Specifications

General

Nozzle width	0.4 mm
Print technology	Fused Filament Fabrication (FFF)
Printing material	ABS, Polylactic acid (PLA)
Number of print heads	2
Maximum build size (WxDxH)	150 x 230 x 140 mm
USB version	2.0
Card reader integrated	Yes
Compatible memory cards	SD
Package depth	430 mm
Package width	565 mm
Package height	535 mm
Package weight	22000 g
Display diagonal	3.5 \
Display technology	LCD
Engraver module	-
3D scanner	No
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	350 W

Weight and Dimensions

Depth	335 mm
Width	480 mm
Height	410 mm
Weight	15000 g