FlashPoint XPLOR 600 Pro R2 - Wireless Flash: R2 Radio 2.4 Ghz Transmission; Setting the Communication Group; Wireless Flash Shooting

13
Wireless Flash: R2 Radio 2.4Ghz Transmission
3. Setting the Communication Group
Short press the < GR/CH > Button to choose group ID from A to E.
Positioning and Operation Range(Example of wireless flash shooting)
• Autoflash Shooting with One Slave Unit
4. Wireless Flash Shooting
MODE
MENU
GR/CH
SET
10%
CH 1
Multi
E
OFF
1/256
5 - 5 Hz
Transmission distance is about 328ft/100m
• Use master unit with wireless transmitting function as the transmitter end.
• Before shooting, perform a test ash and test shooting.
• The transmission distance might be shorter depending on the conditions such as positioning
of slave units, the surrounding environment and whether conditions.