Need help?Do you have a question about the FlashPoint XPLOR 600 Pro R2 and is the answer not in the manual?
General| Brand | FlashPoint |
|---|---|
| Model | XPLOR 600 Pro R2 |
| Category | Lighting Equipment |
| Language | English |
Describes the main unit components and controls.
Details the mounting point for accessories on the unit.
Describes the LCD panel's display modes.
Describes how to attach reflectors and modifiers to the unit.
Details the procedure for securely attaching the flash tube.
Explains the operation of the tilt lock handle for positioning the light.
Step-by-step instructions for attaching and detaching the battery.
Explains how to access and configure wireless settings on the panel.
Details how to adjust channel IDs to prevent interference.
Describes how to set the group ID from A to E.
Covers positioning, operation range, and examples.
Details dividing units into groups and performing multiflash.
Provides solutions for common wireless connection problems.
Explains manual flash output adjustment in 1/3rd stop increments.
Illustrates exposure value changes with flash output level adjustments.
Defines flash duration (t=0.1) and its display.
Explains the S1 slave function for non-TTL strobes with single bursts.
Describes the S2 slave function, ignoring pre-flashes for TTL masters.
Provides the formula to calculate shutter speed for stroboscopic flash.
Explains wireless control using R1 transmitters.
Describes triggering via a 3.5mm sync cord.
Details the function and flash limits to prevent overheating.
Lists error codes displayed on the LCD and their meanings.
To Next Page
