FlashPoint XPLOR 600 Pro R2 - Technical Data

23
Technical Data
Model XPLOR 600 Pro
Wireless Slave Unit Mode
Flash Mode
Guide No.
Flash Duration
Power Joules
Power Output
Stroboscopic Flash
Flash Exposure Compensation (FEC)
Sync mode
Delay Flash
Mask
Fan
Beeper
Modeling Lamp (LED)
Optical Slave Flash
Flash Duration Indication
Display
• Wireless Flash (2.4G wireless transmission)
Wireless Flash Function
Controllable Slave Groups
Transmission Range (approx.)
Channels
Wireless ID
• Power Supply
Power Supply
Full Power Flashes
Recycle Time
Battery Indicator
Power Indication
• Sync Triggering Mode
• Color Temperature
• Stable Color Temperature Mode
• Dimensions
Dimension (with battery)
Net Weight (with battery)
R2 Radio transmission mode (compatible with Canon, Nikon,
Sony, Olympus, Panasonic and Fujilm).
Wireless o
Slave unit of radio transmission
285ft / 87m ISO 100, with high-eciency standard reector)
1/220 to 1/10100 seconds (T0.1)
600Ws
9 steps: 1/256~1/1
Up to 100 times, 100Hz
Manual. Feb: ±3 stops in 1/3 stop increments.
0.01~30 Seconds
√
√
√
38W/4800˚K/TLIC: 93
S1/S2
√
Dot-matrix panel
Slave, O
5 (A, B, C, D, E)
328ft /100m
32 (1~32)
Lithium battery pack (28.8V/2600mAh)
360
Approx. 0.01-1.0s
√
Power o automatically after approx. 30~120 minutes of idle operation.
3.5mm sync cord, wireless control port
5600˚±200˚K
Within ±75˚K in entire power range
10x29.6x5in / 250x245x125 mm (ash tube & reector not included)
6lb 9oz /3 Kg (ash tube & reector not included)
M/Multi
M/Multi
To avoid signal interference eectively, triggering can only be
achieved when the channels and wireless IDs of the master and slave
unit are set to the same.
High-speed sync (up to 1/8000 seconds), rst-curtain sync,
and second-curtain sync