20
SERVICING THE POWER SYSTEM
Required Tools and Fasteners: #1 Phillips Screwdriver, Adjustable Wrench
1.
2.
3.
4.
5.
Remove the propeller and spinner assembly from the motor. Follow the assembly instruc�ons on page 6 in reverse.
Remove the cowling by unscrewing the M3x10 phillips self-tapping screws from the firewall. You will need a long enough screwdriver to reach
through the grill of the cowling.
Gently remove the cowling from the fuselage, being sure not to lose the two M3x10 screws.
Remove the (4) bolts holding the motor to the firewall using a #1 Phillips screwdriver. Disconnect the motor from the ESC.
To remove the ESC, simply unplug its lead from the receiver or Aura and the output leads from the motor.
To Next Page
Loading...
