FLIR A6750sc

5 –Camera Controller
A6700sc/A6750sc User’s Manual 17
Item Name Description
A6750sc: There are buttons to select Full, ½, ¼
windows as well as boxes to enter other sizes.
Click “OK” to set a size. The box will turn red if the
size is not valid.
6
Image Flipping
The icons control horizontal and vertical
image flipping. With these controls, the flipping is
done in the camera so both the digital and analog
video are affected.
7
Sync Source Select internal, external, or video.
Internal: The frame sync is generated internally to
run at the frequency set by the user
External: The frame sync is generated externally
through the Sync In connect on the camera rear
chassis.
Video: The FPA frame sync is generated from the
internal video encoder , locking the digital and
analog clocks together
8
High Sensitivity Mode
(HSM)
HSM is a FLIR-patented algorithm first introduced
in the Gas FindIR cameras that allows the user to
see small temperature changes in the scene.
5.2.4.2 Sync Tab [A6750sc only]
The sync tab allows the user to control function for Syncs, and triggers. All of these sync features
apply only to the A6750sc.
5.2.4.2.1 Sync Mode