EasyManua.ls Logo

FLIR A6750sc

FLIR A6750sc
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 Specifications
A6700sc/A6750sc User’s Manual
41
Power Consumption
Camera DC Power @ 24V
DC
Continuous Cool Down: 24 Watts
Continuous Normal: 21.25 Watts
Cool-down Time
≈7 minutes to reach operating temperature
Sensitivity (w/o optics)
NEΔT
1
18 mK typ.
1) NET is at 50% nominal bucket fill, 298K background, + 5
o
C signal
7.6 Non Uniformity Correction
NUC Types
One Point (offset value with unity gain)
Two Point (offset and gain values) non-volatile
Two Point w/Bad Pixel Detection/Replacement
Update Offset (recalculates offset using current gain)
NUC Source
Internal: Ambient flag (for 1-pt and offset update only)
External: Any user supplied source which covers entire FOV
Bad Pixel Replacement
Two-Point Gradient and nearest neighbor (autoselected)
Number of NUC’s
4 active NUC’s in preset selectable form
>100 NUCs in on-board flash
NUC Time
< 15 seconds
NUC Performance
0.1%
7.7 Detector/FPA
Spectral Response
3-5um (1-5um for broadband models)
Detector Type
InSb
f/#
f/2.5 or f/4
Integration Mode
Snapshot
Format (HxV)
640 x 512
Operability
>99.8%, 99.95% typical
Charge Handling
Capacity
1
7.2 x10
6
e-
Detector Pitch
15 microns
Detector Cooling
Rotary Cryo Cooler

Table of Contents

Related product manuals