DDNS Setup (Advanced)
20
20.1.2 Step 2 of 3: Obtain the System’s Local IP Address
1. Right-click to open the Quick Menu and click Info. Enter the system user name (de-
fault: admin) and password (default: 000000).
2. Write down the IP Address of the system.
• A local IP looks something like this: 192.168.5.118.
20.1.3 Step 3 of 3: Connect to the System’s Local IP Address
Follow the steps below to confirm connectivity over a local network on a PC or Mac.
To connect using the system’s local IP address:
1. Download and install the client software.
• PC Users: Download and install the Client Software for PC from
www.flirsecurity.com/pro.
• Mac Users: Download and install the Client Software for Mac from
www.flirsecurity.com/pro. Double click to extract the software. Drag the software to
Applications.
2. Once installation is finished, double-click the FLIR Cloud™ Client icon (
) from the
desktop or Applications list.
3. Log into the Client Software using the Client Software user name (default: admin) and
password (default: admin) and then click Login.
#LX400022; r. 1.0/16695/16698; en-US
155
To Next Page
Loading...
