FLIR E40 User Manual

Handling the camera13
3. Pull the transparent tape to lift out the battery.
13.6 Mounting an accessory lens
Follow this procedure:
1. Note the two indents on the front of the lens and the corresponding tabs on the lens
cap.
2. Use the lens cap from the accessory lens as a tool to remove the plastic front of the
lens. Rotate the plastic front 30° degrees counter-clockwise.
3. Note the index marks on the lens bayonet mount and on the replacement lens.
4. Carefully push the lens into position.
#T559845; r. AJ/37554/37554; en-US
28

FLIR E40 Specifications

General

Resolution	160 x 120 pixels
Accuracy	±2°C or ±2% of reading
Focus	Manual
Image Storage	SD card
Image Frequency	60 Hz
Digital Camera	3.1 MP
Battery operating time	Approx. 4 hours
Operating Temperature	-15°C to +50°C
Storage Temperature	-40°C to +70°C
Spectral Range	7.5 - 13 µm
Field of View	25° x 19°
Display	3.5 in color LCD
Image Modes	Thermal, Visual, MSX
Measurement Presets	Center Spot, Hot Spot, Cold Spot
File format	JPEG
Battery type	Li-Ion battery
Connectivity	USB, Wi-Fi
Thermal Sensitivity	< 0.07°C @ +30°C (+86°F) / 70 mK