Getting Started
4.2.5 Device Status menu
Select the Device Status menu item from the main menu to access the following inform-
ation about the Fido X4. The information on the Device Status menu is display only; you can-
not modify it.
Serial Number: Each Fido X4 ETD can be identified using its unique serial number. All data
stored on the device will include this serial number.
Firmware Version: The firmware version indicates the version of the software that is cur-
rently running on the system.
Note: The version of the detection algorithm installed on the device is independent from
the firmware version.
SE Type: Indicated the type of sensing element installed in the system.
SE Runtime: The amount of time the current sensing element has been in the system with
the system powered ON.
System Runtime: Total runtime for the system hardware.
Detector Component Temperatures: Current temperature for each detector hardware
component. These values will flash red if they are out of range.
Flow Rate: The volumetric flowrate into the detector inlet and across the sensor array.
Swipe Count: Total number of samples swipes that have been processed.
Disk Free: The amount of free storage space remaining on the device.
Figure 4-9: Device Status menu
28 4226044 (Rev. C) © 2020 FLIR Systems, Inc.
To Next Page
Loading...