FLIR Fido X4 - Figure 5-17: Sample Inserted in TD Slot; Figure 5-18: Gathering Particles Screen

Operating the Fido X4
Figure 5-17: Sample inserted in TD Slot
Step 5: When the TD closes, the Fido X4 will display the message “Gathering Particles”
(Figure 5-18) and a meter bar will appear to indicate sample progress.
Figure 5-18: Gathering Particles screen
Sampling lasts for a maximum of 10 seconds. If a response is detected sooner,
the swipe will be released, and analysis will immediately begin.
Step 6: Follow the on-screen prompts and remove the swipe. The system will display
the message “Analyzing particles" (Figure 5-19).
38 4226044 (Rev. C) © 2020 FLIR Systems, Inc.