FLIR Fido X4 - Table of Figures

Table of Figures
Figure 3-1: Fido X4 Kit Contents 15
Figure 3-2: Fido X4 (front) 16
Figure 3-3: Fido X4 (back and right side) 17
Figure 3-4: Sensing element (dot enlarged) 19
Figure 3-5: Sample swipe 20
Figure 3-6: Reference standard, fully extended 20
Figure 4-1: Keypad 22
Figure 4-2: Example of a Command screen 23
Figure 4-3: Example of a Menu screen 24
Figure 4-4: Examples of configuration screens 24
Figure 4-5: Fido X4 main menu 25
Figure 4-6: Sensitivity menu 26
Figure 4-7: Settings menu with scroll bar 27
Figure 4-8: File Archive menu 27
Figure 4-9: Device Status menu 28
Figure 4-10: Help menu 29
Figure 5-1:Startup screen 30
Figure 5-2: Heating Up screen 30
Figure 5-3: Present Reference Standard screen 31
Figure 5-4: Incomplete verification warning 31
Figure 5-5: Extending the reference standard 32
Figure 5-6: Reference standard in TD slot 32
Figure 5-7: Checking System Performance screen 33
Figure 5-8: Verify Pass screen 33
Figure 5-9: First Verify Fail screen 34
Figure 5-10: Verify Fail screens 34
Figure 5-11: Replace sensing element alert screen 34
Figure 5-12: Reference Presentation Error screen 35
Figure 5-13: Examples of "first touch" areas 36
Figure 5-14: Bullseye design (not present on actual swipe) indicates Zone of Analysis 36
Figure 5-15: Examples of bad (top) and good (bottom) swiping technique 37
Figure 5-16: Insert Sample screen 37
Figure 5-17: Sample inserted in TD Slot 38
Figure 5-18: Gathering Particles screen 38
Figure 5-19: Analyzing Particles screen 39
Figure 5-20: Analysis result screens 39
Figure 5-21: System verification screen for Vapor Mode 40
4226044 (Rev. C) © 2020 FLIR Systems, Inc.
67
FLIR Fido® X4 Operations Manual