4226044 (Rev. C) © 2020 FLIR Systems, Inc.
49
FLIR Fido® X4 Operations Manual
is being generated.
• If you select Custom Report, a screen will appear where you can select the
date range for your report. Once you have selected the date range, the report
will begin to generate.
Figure 6-5: Report generation in progress
After a summary report is generated, it is temporarily stored on the device. Reports can be
accessed by connecting the Fido X4 to a computer, using the USB-C to USB-A data cable. To
conserve storage space, reports are erased from the device after a power cycle. For more
information, see "Connecting to a Computer" on p. 51.
To Next Page
Loading...