FLIR Fido X4 - Figure 8-4: Accessing the Sensing Element; Figure 8-5: Sensing Element in Place

Step 4: Tilting the head of the Fido X4 downward at an approximately 45-degree angle
as shown in Figure 8-11, lift the sensing element door up to expose the sensing
element.
Figure 8-4: Accessing the sensing element
Figure 8-5: Sensing element in place

Caution: The sensing element is HOT.
Handle with care to avoid burns.
When handling the sensing element, take care only to touch the end of the Ele-
ment that is marked with a dot (Figure 8-5).
4226044 (Rev. C) © 2020 FLIR Systems, Inc.
55
FLIR Fido® X4 Operations Manual