FLIR i3 - Recalling an Image

11.4 Recalling an image
General
When you save an image, it is stored on the removable miniSD™ memory card. To
display the image again, you can recall it from the miniSD™ memory card.
Procedure
Follow this procedure to recall an image:
Push the Archive button.1
Do one of the following:
■
Push the navigation pad left/right to select the image you want to view.
■
Push the + button, use the navigation pad to select the image you want
to see, then push the right selection button (Open).
2
To return to live mode, do one of the following:
■
Push the Archive button.
■
Push the right selection button (Close).
3
20 Publ. No. T559580 Rev. a486 – ENGLISH (EN) – November 17, 2010
11 – Using the camera