Starting the camera for the first
time (FLIR K65)
6
Applicability: FLIR K65
The first time you start the camera, you need to unlock the camera by entering a camera
unique code. The code is based on the serial number of the camera. To get the camera
unique code, you must log in using a FLIR Customer Support account and register the
camera. If you already have an existing FLIR Customer Support account, you can use
the same login credentials.
Follow this procedure:
1. Charge the battery for 4 hours before starting the camera for the first time, or until the
blue battery condition LED glows continuously.
2. Push the on/off button to turn on the camera. This displays the following dialog box:
3. Use a computer or other device with internet access and go to the following website:
http://support.flir.com/unlock
This displays the following dialog:
4. To log in with your existing FLIR Customer Support account, do the following:
4.1. Enter your Username and Password.
4.2. Click Log In.
#T559946; r. BA/41926/41970; en-US
10
To Next Page
Loading...
