Technical data14
14.6 FLIR K65
P/N: 72202-0303
Rev.: 41168
General description
The FLIR K65 is a robust and reliable infrared camera designed to perform under extremely severe con-
ditions. The FLIR K65 has an intuitive interface with a design that makes it easy to control even with a
gloved hand. The crisp and clear image helps you to navigate through smoke and to make quick and
accurate decisions.
Benefits:
• Compliance with NFPA 1801-2013.
• Robust and reliable: The FLIR K65 is designed to meet tough operating conditions. It can withstand
a drop from 2 m (6.5 ft.) onto a concrete floor, is water resistant to IP67, and is fully operational up to
85°C (185°F), and operational up to +150°C (+302°F) for 15 minutes, and +260°C (+500°F) for 5
minutes.
• Clear and crisp thermal images: The maintenance-free uncooled microbolometer sensor produces
clear and detail-rich images of 320 × 240 pixels which have been further improved with FSX, a digital
image-processing enhancement technique. Thermal images are presented on a large, bright 4″ dis-
play, helping you to navigate and to make quick and accurate decisions.
• Easy-to-use—also in a gloved firefighter’s hand: An intuitive and simple user interface allows you to
focus on the job. The FLIR K series can be controlled by just three large buttons on top of the unit.
Ideal for a gloved firefighter’s hand.
• Recording.
Imaging and optical data
IR resolution 320 × 240 pixels
Thermal sensitivity/NETD < 30 mK @ +30°C (+86°F)
Field of view (FOV)
51° × 38°
Depth of field 0.84 m to infinity (33 in. to infinity)
Focal length 9 mm (0.35 in.)
Spatial resolution (IFOV)
2.8 mrad
F-number 1.25
Image frequency 60 Hz
Focus Fixed
Zoom 2× digital zoom
Detector data
Detector type Focal plane array (FPA), uncooled microbolome-
ter (VOx)
Spectral range
8–14 µm
Pitch 25 µm
Image presentation
Display
4 in. LCD, 320 × 240 pixels, backlit
Auto range
Yes, selectable on/off using FLIR Tools
Contrast optimization Digital image enhancement using FSX
#T559946; r. BA/41926/41970; en-US
58