Operation
12
12.5.1.1.3 Explanation
1. LCD area.
2. Area activating the automatic range change.
12.5.2 Explanation of the different camera modes
12.5.2.1 Basic mode
Figure 12.1 Basic mode.
Basic mode is the default mode of the camera. It is a multipurpose mode for the initial fire
attack with life-saving operations and control of the fire. The camera automatically
switches between the high-sensitivity range and the low-sensitivity range, to maintain an
optimal infrared image while at the same time maintaining a safe and consistent heat col-
orization of the fire scene.
• Automatic range.
• Colorization of heat: +150 to +650°C (+302 to +1202°F).
• High-sensitivity range: –20 to +150°C (–4 to +302°F).
• Low-sensitivity range: 0 to +650°C (+32 to +1202°F).
Note To go to Basic mode from any other mode, push and hold the on/off button for
less than 1 second.
12.5.2.2 Black and white firefighting mode
Figure 12.2 Black and white firefighting mode.
Black and white firefighting mode is a standardized firefighting mode based on Basic
mode. It is a multipurpose mode for the initial fire intervention that includes life-saving op-
erations and control of the fire. It is specifically designed for fire services that do not want
to use the heat colorization feature.
#T559946; r. BA/41926/41970; en-US
29
To Next Page
Loading...
Need help?
General
