Operation
12
12.5.2.5 Heat detection mode
Figure 12.5 Heat detection mode.
Heat detection mode is optimized for searching hotspots during overhaul after the fire is
out—typically to ensure that there is no remaining hidden fire. This mode can also be
used to find thermal patterns (e.g., signs of people in car seats after accidents), to en-
sure that everyone has been found. This mode can also be used to search for people in
water and open landscapes.
• High-sensitivity range only.
• Colorization of heat: the 20% highest temperatures in the scene.
• High-sensitivity range: –20 to +150°C (–4 to +302°F).
#T559946; r. BA/41926/41970; en-US
31
To Next Page
Loading...
Need help?
General
