FLIR K33 - Getting Started with Your Camera; FLIR K33 Quick Start Guide; FLIR K53 Quick Start Guide

Quick start guide
6
6.1 Quick start guide, FLIR K33
Follow this procedure:
1. Charge the battery for 4 hours before starting the camera for the first time, or until the
blue battery condition LED glows continuously.
2. Push the on/off button to turn on the camera.
3. Aim the camera toward the object of interest.
4. To freeze the image, pull and hold the trigger.
5. To return to the live image, release the trigger.
Note The function of the trigger is configured by a setting in FLIR Tools, see section
11.10.2 The User interface tab, page 27.
6.2 Quick start guide, FLIR K53
Follow this procedure:
1. Charge the battery for 4 hours before starting the camera for the first time, or until the
blue battery condition LED glows continuously.
2. Push the on/off button to turn on the camera.
3. Aim the camera toward the object of interest.
4. Pull the trigger to save an image.
5. Pull and hold the trigger to record a video clip.
6. Connect the camera to a computer, using the USB cable.
7. Do one of the following:
• Move the image to the computer using a drag-and-drop operation in Microsoft Win-
dows Explorer.
Note Moving an image using a drag-and-drop operation does not delete the im-
age in the camera.
• Move the image to the computer using FLIR Tools. In FLIR Tools you can analyze
the images and create PDF reports.
Note The function of the trigger is configured by a setting in FLIR Tools, see section
11.10.2 The User interface tab, page 27.
#T810170; r. AE/41948/41948; en-US
11