FLIR K33 - Cleaning; Customer Support

In-truck charger (optional accessory)
12
12.8 Cleaning
CAUTION
Disconnect the in-truck charger from the fire engine’s 12–24 VDC system before cleaning.
The in-truck charger can be cleaned using warm water or a weak detergent solution. Do
not use solvents or similar liquids.
12.9 Customer support
Should you experience any problems, do not hesitate to contact our Customer Support at
http://support.flir.com.
#T810170; r. AE/41948/41948; en-US
32